Glossary
A reference guide for key terms and concepts in autonomous material handling.
Material Properties
Yield Stress : The minimum stress required to initiate flow in a material. Materials with high yield stress (like pastes and slurries) require more force to move.
Rheology : The science of material deformation and flow. Describes how materials respond to applied forces and stresses.
Viscosity : A measure of a fluid's resistance to flow. High viscosity materials (like honey) flow slowly; low viscosity materials (like water) flow easily.
Flowability : The ease with which a material can be moved, poured, or dispensed. Depends on particle size, shape, moisture content, and cohesion.
Non-Newtonian Fluid : A fluid whose viscosity changes with the applied shear rate. Examples: ketchup, blood, paint (shear-thinning), or Oobleck (shear-thickening).
Cohesion : The attractive forces between particles in a powder or semi-solid, affecting how they stick together and flow.
Particle Size Distribution (PSD) : The range and relative proportions of particle sizes in a powder. Affects flowability and packing density.
Handling Strategies
Characterize, Then Act : A strategy of measuring material properties first, then executing a pre-planned handling procedure based on those measurements.
Iterative Optimization : A strategy involving repeated cycles of dispense → measure → adjust to optimize process outcomes.
Real-Time Correction : A strategy that uses in-situ sensors to detect deviations during a process and corrects them on-the-fly.
Feedforward Prediction : A strategy that predicts the optimal process parameters before execution using prior knowledge or models.
Simulation-Based Generalization : A strategy of training models in simulation, then deploying them to handle real materials with different properties.
Physical Reinvention : A strategy of solving handling challenges by redesigning hardware (nozzles, feeders, grippers, etc.).
Tactile Retrieval : A strategy using touch-based sensing (force, texture, compliance) to manipulate objects without vision.
Hardware & Equipment
Peristaltic Pump : A pump that moves fluid by compressing and releasing a flexible tube in sequence. Good for viscous or particulate fluids.
Syringe Pump : A pump that dispenses fluid by pushing a plunger through a syringe. Precise but limited volume.
Auger / Screw Feeder : A rotating screw mechanism for handling powders and granules, providing controlled dispensing rates.
Gripper : A mechanical or pneumatic device for grasping and manipulating solid objects or partially formed items.
Powder Hopper : A container that feeds powder into a dispenser or processing unit, often with vibration or agitation.
Rheometer : An instrument that measures the flow and deformation properties of materials under controlled conditions.
AI & Control Concepts
Feedback Control : A control system that measures output and adjusts input to maintain desired performance (e.g., PID control).
Feedforward Control : A control system that predicts required adjustments based on known inputs, without measuring output.
Cascade Control : A hierarchical control structure where an outer controller sets targets for inner controllers.
PID Control (Proportional-Integral-Derivative) : A standard feedback control algorithm that adjusts output based on error (proportional), accumulated error (integral), and error rate (derivative).
Machine Learning (ML) : Algorithms that learn patterns from data to make predictions or decisions without being explicitly programmed.
Regression : An ML task that predicts continuous numerical values (e.g., predicting dispense volume from parameters).
Classification : An ML task that predicts categorical outcomes (e.g., predicting material type from sensor data).
Digital Twin : A virtual model of a physical system that simulates its behavior, used for testing and prediction.
Discrete Element Method (DEM) : A simulation technique for modeling particle interactions in powders and granular materials.
Finite Element Method (FEM) : A simulation technique for modeling continuous deformation in solids and semi-solids.
Process Metrics
Precision : The consistency or repeatability of a process. Low variance in repeated measurements or operations.
Accuracy : How close a measurement or result is to the true value or target.
Throughput : The volume or mass of material processed per unit time.
Yield : The percentage of material successfully processed or dispensed without waste or defects.
Process Window : The range of operating conditions (e.g., temperature, speed, parameters) within which a process works acceptably.
Cross-Cutting Terms
Autonomous Formulation : The automated design and synthesis of materials or products with minimal human intervention, often using feedback loops and optimization.
Closed-Loop System : A system with sensors that measure outcomes and adjust inputs to maintain control (feedback).
Open-Loop System : A system that executes pre-planned instructions without measuring or adjusting based on outcomes.
Sensor Fusion : Combining data from multiple sensors to improve understanding or control of a process.
Payload : The material being handled or dispensed in a robotic or automated system.
Robustness : The ability of a system to maintain performance despite variations in materials, conditions, or disturbances.
Scalability : The ease with which a process or strategy can be adapted to handle different material types, scales, or production rates.